Table of Contents
Advertisement
Installing the Switch
Safety Information
2-2
Warning
ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove cover. No user-service-
able parts inside. This unit contains HAZARDOUS VOLTAGES and
should only be opened by a trained and qualified technician. To avoid
the possibility of ELECTRIC SHOCK, disconnect electric power to the
product before connecting or disconnecting the LAN cables.
Laser
This is a "CLASS 1 LED PRODUCT."
LIGHTNING DANGER
DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.
Caution
POWER CORD IS USED AS A DISCONNECTION DEVICE. TO
DE-ENERGISE EQUIPMENT disconnect the power cord.
ELECTRICAL—AUTO VOLTAGE ADJUSTMENT
This product will automatically adjust to any voltage between the
ranges shown on the label.
ELECTRICAL—TYPE CLASS 1 EQUIPMENT
THIS EQUIPMENT MUST BE EARTHED. Power plug must be
connected to a properly wired earth ground socket outlet. An
improperly wired socket outlet could place hazardous voltages on
accessible metal parts.
ELECTRICAL—CORD NOTICE
Use power cord, maximum 4.5 meters long, rated 6 amp minimum,
250V, made of HAR cordage molded IEC 320 connector on one end
and on the other end a plug approved by the country of end use.
A-8
Caution
Air vents must not be blocked and must have free access to the room
ambient air for cooling.
Caution
OPERATING TEMPERATURE
This product is designed for a maximum ambient temperature of 40°
C.
A-13
Caution
ALL COUNTRIES: Install product in accordance with local and
National Electrical Codes.
A-3
A-12
A-15
A-6
A-11
A-14
A-4
A-10
Advertisement
Table of Contents
