Table of Contents
Advertisement
Remote Control
ICFR_xxxx"cr"
ISP_xxx"cr"
TDF_xxxx"cr"
RDF_xxxx"cr"
IBS_nnnnnn"cr"
IRE_xxxx"cr"
DE_xxx"cr"
SE_xxx"cr"
DDF_xxxxxx"cr"
BDCA_dd;cc_dd;cc..."cr" Bulk Drop Channels Assignment
IDF_xxxxxx"cr"
BICA_dd;cc_dd;cc..."cr""lf"]
5.2 MODEM Faults Status (Summary)
This command returns the current overall fault conditions of the MODEM.
Command:
Response:
DMD_xxx"cr"
MOD_xxx"cr"
CEQ_xxx"cr"
ITX_xxx"cr"
IRX_xxx"cr""lf"]
5.3 Modulator Status
The modulator status is returned as a block of data which indicates general status
information.
Command:
Response:
RF_xxx"cr"
MOD_xxx"cr"
AGC_xxx"cr"
SYN_xxx"cr"
BCLK_xxx"cr"
TCLK_xxx"cr"
ICH_xxx"cr"
QCH_xxx"cr"
SFLT_xx"cr""lf"]
5.4 Demodulator Status
The demodulator status is returned as a block of data which provides general status
information.
Command:
Response:
DMD_xxx"cr"
CD_xxx"cr"
B-B–18
<add/MFS_"cr"
>add/MFS_"cr"
<add/MS_"cr"
>add/MS_"cr"
<add/DS_"cr"
>add/DS_"cr"
Coding Format Receive (AMI/HDB3/B8ZS)
Substitution Pattern (ON/OFF)
Transmit Data Fault (NONE/DATA/AIS)
Receive Data Fault (NONE/DATA/AIS)
Interface Buffer Size
Interface Read Error Select (FRM/2047)
Descrambler Enable (ON/OFF)
Scrambler Enable (ON/OFF)
Drop Data Format
Insert Data Format
Bulk Insert Channels Assignment
Demodulator (FLT/OK)
Modulator (FLT/OK)
Common Equipment (FLT/OK)
Interface Transmit Side (OK/FLT)
Interface Receive Side (OK/FLT)
RF output (ON/OFF) actual status not config
Module missing or won't program (OK/FLT)
AGC leveled (OK/FLT)
Carrier synthesizer (OK/FLT)
Bit clock (OK/FLT)
Transmit clock (OK/FLT)
I-channel (OK/FLT)
Q-channel (OK/FLT)
Number of stored faults logged (0 to 10)
Demod module (OK/FLT)
Carrier detect (OK/FLT)
SDM-309B Satellite Modem
MN/U-SDM309B Rev. #
Advertisement
Table of Contents
