Installing Accessories - Konica Minolta magicolor 3300 Installation Manual

2
Adjust the media guides to fit the media
size you're loading.
The tray extender supports long media.
3
Fan a stack of approximately 100
sheets of media.
A fill limit mark is provided on the inside
of the tray.
Attention
Do not overfill the tray. The media should fit easily between the
guides. Improperly adjusted guides may cause poor print quality,
media jams, or printer damage.
4
Align the edges of the media and then
load it with its printing side up and short
edge toward the printer.
Often, an arrow on the media package
label indicates the printing-side of
the media.
5
Make sure the media fits properly in
the tray.

Installing Accessories

Attention
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
If you purchased any additional printer accessories, then install them now.
If installation instructions are included with the accessory, follow them. If not,
instructions are included in the User's Guide on the Documentation CD-ROM.
Installing Accessories
19