Installing Accessories; Introduction; Antistatic Protection - Konica Minolta PagePro 1350EN User Manual

Introduction

Note
Use of accessories not manufactured or supported by
KONICA MINOLTA will void your warranty.
This chapter provides information about the following accessory.
Dual In-Line
Memory Modules
(DIMMs)
Note
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.

Antistatic Protection

Note
If an antistatic wrist strap is provided in your printer option kit, attach
one end of it to your wrist and the other end to any convenient electrical
ground (for example, the bare metal chassis of equipment, as on the
back of a computer, that is plugged in but turned off). Never attach the
wrist strap to any piece of equipment with an electrical current present.
Turn off all power switches first. Plastic, rubber, wood, painted metal
surfaces, and telephones are not acceptable grounding points. The
printer is not an acceptable grounding point either because it must be
unplugged before you perform this task.
If you do not have an antistatic wrist strap, discharge your body's static
electric charge by touching a grounded surface before you handle any
printer boards or components and before removing the controller
board. Also avoid walking around after grounding yourself.
74
128 MB DIMM (unbuffered)
Introduction