Logs; Chapter 48 Logs; Overview; What You Can Do In The Log Screens - ZyXEL Communications ZyWall USG 2000 User Manual

C
H A P T E R

48.1 Overview

This chapter provides general information about the ZyWALL's log feature.
Note: When a log reaches the maximum number of log messages, new log messages
automatically overwrite existing log messages, starting with the oldest existing
log message first.
• For individual log descriptions, see
• For the maximum number of log messages in the ZyWALL, see
page 805.

48.2 What You Can Do In The Log Screens

• Use the Maintenance > View Log screen
current log messages. You can change the way the log is displayed, you can e-
mail the log, and you can also clear the log in this screen.
• Use the Maintenance > Log Settings screen
specify which log messages are e-mailed, where they are e-mailed, and how
often they are e-mailed.

48.3 View Log Screen

Log messages are stored in two separate logs, one for regular log messages and
one for debugging messages. In the regular log, you can look at all the log
messages by selecting All Logs, or you can select a specific category of log
messages (for example, firewall or user). You can also look at the debugging log
by selecting Debug Log. All debugging messages have the same priority.
To access this screen, click Maintenance > View Log. The log is displayed in the
following screen.
ZyWALL USG 2000 User's Guide
Appendix A on page 815.
(Section 48.3 on page
(Section 48.4 on page
48

Logs

Chapter 53 on
763) to view
766) to
763