Table of Contents
Advertisement
Please respect the combinations shown below if you like to lower the wheelchair.
1
2
3
L
Very important: possible combinations:
PARKING BRAKES
The brakes are designed to lock the wheelchair when stopped and in no event to reduce the
speed of the wheelchair. To put the brake on, push the lever down and to take it off, pull the lever up.
To adjust properly, the brake block should be 15 mm from the tyre when the brake is off.
ACCESSORIES
• Adjusting the body supports (L04)
There is a body support on the right side and the left side.
They can be folded away and their height, width and depth can be adjusted.
1. The body support can be folded away. Pull gently up and swing outwards to facilitate transfers.
2. The height is adjusted by changing the position of screw (A) located on the vertical tube of the body
support (there are three possible positions).
3. The width is adjusted by loosening screws (B) and (C) on the toothed gearwheels for the optimum
setting and then tightening.
4. The depth is adjusted by loosening screw (D) located under the horizontal tube of the body support
and then tightening.
1'
2'
3'
1 – 1'
2 – 2'
3 – 3'
9
SERENYS
2012-03
Advertisement
Table of Contents
