To support you on the installation and repairs of this manual wheelchair, we provide you with this installation manual. Please read it carefully. If you still have questions after reading this manual, do not hesitate to contact Vermeiren. The information in this manual applies to the following wheelchair(s): ...
Sagitta, Sagitta SI 2023-07 Scope of delivery Scope of delivery The following items are part of the delivery: 1 frame with splash guard, rear and front wheels 1 foot bracket Tools Manual Accessories Tire pump Before use, check if everything is included and that no products are damaged.
Make sure all screws are firmly secured before riding the wheelchair. Adhere to the tightening torques for screws according to the Torque table on our website. Important remarks For more information, contact Vermeiren. See the website http://www.vermeiren.com/ Installation manual...
The Vermeiren Sagitta, Sagitta SI are adjustable in 3 seat heights and 3 seat angles (0°-3°-7°) by changing the position, diameter of the front wheels and diameter of the rear wheels. For each height and angle there is a different setting of the front and rear wheels.
Page 9
9. If installed properly the swivel axles of the front wheels and the ground must be perpendicular. Check this. 10. Adjust the brakes according to § 4.3. The Vermeiren Sagitta SI can be adjusted in 3 different seat angles without changing wheel diameters and front wheel forks. Seat depth...
4. Retighten screws and . Adjusting the seat depth The Vermeiren Sagitta, Sagitta SI is standard adjustable in 3 seat depths by changing the length and type of the frame. This should be decided at the purchase. Seat depth...
Sagitta, Sagitta SI 2023-07 Assembly and adjustments Adjusting the parking brakes Depending on the diameter of the rear wheels and their position, the brakes can be adjusted accordingly. The following instructions apply to both the push-pull brakes and the sports brakes.
Sagitta, Sagitta SI 2023-07 Assembly and adjustments Adjust the length of the foot bracket as follows: 1. Loosen screw at the end of the foot support frame on the left and right side. 2. Adjust the length of the foot bracket to a comfortable length.
2023-07 Assembly and adjustments Adjusting the back height The back height of the Sagitta can be adjusted in 12 different combinations. Four by changing the frame and 3 by changing the position of the back tube. Frame Changing position of the back tube...
Inflate the tyre using inflating equipment which complies to regulations and with a pressure indication in “bar”. Only use replacement parts approved by Vermeiren. If you want to change the tyres or inner tubes, you should note the following: 1.
Page 16
Vermeiren GROUP Vermeirenplein 1 / 15 2920 Kalmthout website: www.vermeiren.com Instructions for specialist dealer This instruction manual is part and parcel of the product and must accompany every product sold. Version: A, 2023-07 Basic UDI: 5415174 122106Sagitta JD 5415174 122106Sagitta SI QS...