Table of Contents
Advertisement
does not function properly, please consult your specialist dealer. Check the tyre pressure and inflate
them if necessary.
•
APPROX. EVERY 8 WEEKS
Depending on the frequency of use lubricate the following parts lightly:
-
Movable parts of the arm rest mechanism
-
Bearings of the brake levers
-
Movable parts of the footrests
•
APPROX. EVERY 6 MONTHS
Depending on the frequency of use check the following:
-
Cleanliness
-
General condition
-
Function of the steering wheels (If the rotation resistance is too great, clean the bearings
of the steering castors. If this is insufficient, please consult your specialist dealer.)
l
Only authorised individuals are entitled to perform measures for exchanging components or
making repairs/renovations. Kindly contact your specialist dealer.
l
Use only original replacement parts, which are available from the manufacturer via your dealer.
INSPECTION
In principle we recommend one inspection every twelve months, and a minimum of one before usage is
resumed. All of the following checks must be performed and documented by authorized persons:
•
Check the frame parts for three-dimensional deformation and reduced functioning.
•
Visually check for damage to the paintwork (risk of corrosion)
•
Check the operation of the wheels (free running, level rolling, axle play, tyres, profile, condition of the
rims, air pressure (in the case of pneumatic tyres), floating axles, etc.)
•
Check the solidity and seating of all screws
•
Verify the amount of grease on the metal joints of moveable parts
•
Visually check all plastic parts for tears and brittle spots
•
Check the functioning of the armrests and leg supports (locking, loading, deformation, wear and tear
due to loading, adjustment levers)
•
Check the functioning of the gas pressure springs and rope pulls (kinks, foreign bodies), levers and
adjusting screws. If necessary, adjust the rope pulls using the adjusting screws.
•
Check the functioning of the removable parts (e.g. tip protector, headrest, safety belt, accessory)
•
Verify completeness of the delivery condition
•
Is the instruction manual available?
Have the service confirmed in the service plan only when at least the above-mentioned aspects have
been checked. If your specialist dealer is incapable of performing the required services, please contact
the manufacturer. We shall gladly refer you to authorized specialist dealers in your area.
l
The manufacturer is not liable for damage caused by the lack of or improper inspection.
CARE
Your multi-function wheelchair requires regular care if you want it to be visually attractive also. Please
take note of the following hints:
•
COVERS
Clean the covers with a cloth moistened with hot water. You may remove stubborn dirt by taking off the
cover and washing it with a mild commercial detergent. Stains can be removed by using a sponge or a
soft brush. Do not use any sharp-edged objects for cleaning SOFT covers.
l
Do not use strong cleaning liquids like solvents, nor use hard brushes.
l
We shall decline all liability for damage caused by the use of inappropriate cleaning agents.
•
PLASTIC PARTS
Clean all plastic parts of your wheelchair with commercial plastic cleaners. Please comply with special
product information.
13
SERENYS
2012-03
Advertisement
Table of Contents
