Table of Contents
Advertisement
Adjusting the length:
The length of the leg support is adjusted using screw (A) located at the end.
Use the Allen key (delivered with the wheelchair) to make this adjustment.
L
Please ensure screw (A) is securely tightened before mounting the leg support.
• CUSHIONS
Respectively place the seat and backrest cushions in their sockets.
These are attached using Velcro strips.
• HEADREST (picture 5)
Place the headrest in the appropriate socket located in the upper part of the top of the backrest.
A
C
The height is adjusted using the screw (A).
L
Please ensure the screw (A) is securely tightened after the adjustment
• PUSHING HANDLE (picture 5)
The height of the pushing handle can be adjusted in accordance with the height of the helper.
Once it is at the desired height, tighten the screws (B).
A
B
D
C
5
SERENYS
2012-03
Pic. 4
Pic. 5
Advertisement
Table of Contents
