d) Remove the two screws at the recessed
hole and bottom of the console.
Console Screws
e) Lift the top edge of the console and
unhook it from the holder clips.
Lift Top Edge
Of Console
f) Press the locking tab on the right rear
side of the console inward, and re-
move the console.
Console
Locking Tab
6.
To remove the touchpad/LED assem-
bly:
a) Pull the selector knob off the switch
shaft.
b) Press the seven console locking tabs,
and unsnap the touchpad/LED as-
sembly, then lift the assembly from the
console and remove it.
Pull Off
Selector Knob
Release 7 Console Locking Tabs
Touchpad/LED Assembly
4-3