Whirlpool Duet Sport WFW8300SW Instruction Manual page 32

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
4. Plug in washer or reconnect power.
5. Run the washer through the Normal/Ca-
sual cycle. Use only HE High Efficiency
detergent. Use 1/2 the manufacturer's
recommended amount for a medium sized
load.
To transport the washer:
1. If washer will be moved during freezing
weather, put in 1 qt (1 L) of R.V.-type
antifreeze in the drum. Run washer on a
Drain/Spin cycle.
2. Unplug the power cord.
3. Disconnect the drain hose from the drain
system and attach to rear panel clips.
4. Shut off both water faucets.
5. Disconnect the water inlet hoses from fau-
cets, then drain the hoses and clip them
to the rear panel of the washer.
6. IMPORTANT: Call service. Do not reuse
transport bolts. Unit must be transported
in the upright position. To avoid suspen-
sion and structural damage, your machine
must be properly set up for relocation by
a certified technician.
Reinstalling the washer
1. Follow the "Installation Instructions" to
locate, level and connect the washer.
2. Run the washer through the Normal/
Casual cycle to clean the washer and
remove the antifreeze, if used. Use only
HE High Efficiency detergent. Use 1/2 the
manufacturer's recommended amount for
a medium sized load.
3-14