Removing The Console And The Touchpad/Led Assembly - Whirlpool Duet Sport WFW8300SW Instruction Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the three T-20 hex-head Torx
screws from the top cover of the washer.
4. Pull back on the cover and release the
tabs in the console from the slots in the
cover, then lift the cover off the unit.
Tabs
Top Cover Screws
REMOVING THE CONSOLE AND
THE TOUCHPAD/LED ASSEMBLY
Console
5. To remove the console:
a) Pull out and disconnect cable connec-
tor UI8 from the central control unit.
b) Remove the cable wires from the two
central control unit clips.
UI8
c) Pull the detergent dispenser drawer
out as far as it will go, then press down
on the release tab, and remove the
drawer from the unit.
Dispenser Drawer
Release Tab
4-2
Central Control Unit
Clips