If A Warning Condition/Fault Occurs - Hitachi PXR-D Instruction Manual

8. If a Warning Condition/
8.1 Indications Given When a Warning
Entering a reset signal
will execute the same
action.( See Section
1.5.3-9, Input for remote
control signals.)
¡When a warning condition or fault occurs, the warning or fault lamp comes on.
Operating status indicator lamps
¡A confirmation message appears to indicate an operating error or to prompt for
process judgment.
¡If any "fault" occurs to incur a printing failure while the LCD backlight is
extinguished or if a "warning condition" occurs and calls for maintenance although
it does not invoke any printing failure, a window opens to display a fault message
or warning message.
¡The following on-screen indications are given.
1
If a fault occurs
The name of the fault is displayed here.
Cause
Clear
¡When you press Clear after eliminating the cause, the fault condition
clears and the message disappears.
¡When you press Close , the fault window clears but the fault condition
persists.
¡However, if the fault condition does not exist any longer, only the Close
key is displayed.
Fault Occurs
Condition/Fault Occurs
A message of the fault is given here.
Close
The cause of the fault is indicated here.
Indications Given When a Warning Condition/Fault Occurs 8-1