The System Then Returns You To The "Print Description" Screen - Hitachi PXR-D Instruction Manual

Operations for
modifying the setting
contents
(See Section 2.1.3,
Operations for
modifying the setting
contents. )
If the cursor is not
displayed, press
Show cursor .
4-2 Managing the Operations
1 From the "Print description" screen, press Menu .
The maintenance selection menu then appears.
Auxiliary
Maintenance
function
2 Press Operation management .
The "Operation management" screen then opens.
Operation management 2011.07.07 12:45
Ink operating time
Ink alarm time
Cumulative op. time
Print count
Ink, makeup ink
Ink viscosity
Ink pressure
Ambient temperature
Deflection voltage
Excitation V-ref.
Excitation frequency
1 2 3 4
3 Press Reset .
The operating time field then reads [0000] hours.
Operation management 2011.07.07 12:45
Ink operating time
4
Press two times consecutively.
The cursor then moves to the print count field.
5 Press Reset .
The print count field then indicates a print count of [000000000].
Operation management 2011.07.07 12:45
Ink operating time
Ink alarm time
Cumulative op. time
Print count
6
Press Apply .
7 Press Back .

The system then returns you to the "Print description" screen.

Operation Environment
Show fault
management setup menu
Status: Ready
(hours)
(hours standard value:1200)
(hours)
(prints)
JP-K67, TH-TYPE A
100 (standard value:100)
0.255 (MPa ; standard value:0.255)
21 ( C; range: 0 45)
5.6 ( k V)
10 (0 19)
68.9 (kHz)
5 6 7 8 9
Decre-
ment
Status: Ready
(hours)
Status: Ready
(hours)
(hours standard value:1200)
(hours)
(prints)
Menu
Com=0
Start Shut
up down
Comm
Manual
On/Off
Show
cursor
Cancel
changes
Reset
0
Incre-
Back
ment
Com=0
Strat Shut
up down
Com=0
Start Shut
up down
Comm
Manual
On/Off
Apply