Setting The Operating Environment; Managing The Operations - Hitachi PXR-D Instruction Manual

4. Setting the Operating Environment

4.1 Managing the Operations

(1) Overview
¡You can predefine the operating conditions.
¡The operating time and print count are stored in memory every hour (at 00 minute).
If power failure occur, the previously stored status will be restored.
Item
Ink operating
time
Ink alarm time
Cumulative
operating time
Print count
Ink name
Makeup ink
name
Ink viscosity
Ink pressure
Ambient
temperature
Deflection
voltage
Excitation
V-ref.
Excitation
frequency
(2) Operating procedure
¡Setting the operating time to 0 and print count to 0
¡The operating time elapsed since last ink replacement is displayed.
This value can be changed.
¡The value "0" is to be set upon ink replacement. A value between 0
and 9999 hours appears on the display.
¡If the preselected ink alarm time is exceeded, a warning message
appears to prompt for ink replacement.
¡The suggested ink replacement time is displayed.
¡The standard value is constantly displayed.
¡The cumulative operating time is displayed. This value cannot be
changed.
¡The displayed value is incremented up to 999,999 hours.
¡The total number of prints made is displayed.This value can be
changed.
¡A setting between 0 and 999,999,999 can be selected.
¡The employed ink type is displayed.
¡The employed makeup ink type is displayed.
¡The ink viscosity is displayed.
¡The standard value is 100.
¡The ink pressure is displayed.
¡The standard value is constantly displayed.
¡The ambient temperature and permissible ambient temperature range
are displayed.
¡The deflection voltage in "ready " state is displayed.
¡The excitation V-ref. setting is displayed.
¡The nozzle excitation frequency is displayed.
Edit
Print line
Print
message
setup
format
Description
Print
Select
Save
spec.
message
message
Menu
Managing the Operations 4-1