Count Character Transmission - Hitachi PXR-D Instruction Manual

6-14 Standard Communication Functions

6.3.9 Count Character Transmission

¡The following shows an example of changing "XXXX" to 4-digit count characters.
Assume that the printer is ready for printing.
Fixed characters "XXXX" have been input.
Print description
Message name XXXXX XX X X X X X
Column 1
[ ] [
[ ] [
Edit
Print line
message
setup
3 Press Comm On/Off button.
The status then change from "offline" to "online".
4 Transmit "Item No." and "count character" from the external device to the
IJ printer.
Shows text data between STX and ETX
Transmission data
DLE 4
Transmission code
10H 34H
With the above transmission code, the setting on the number of transfer bytes
will be described in the 2-byte mode.
2011.07.07 12:45 Status: Ready
Column 2 Column 3
] [
] [
Print layout
Print Print Select
spec.
format message
Count Count
Character Character
Item No.
F2H 5AH F2H
Com=0
Start Shut
up down
Comm
Manual
On/Off
]
]
Prev. Next
col. col.
Save
Back
message
Count Count
Character Character
5AH F2H 5AH F2H 5AH