Setting The Password; Comm - Hitachi PXR-D Instruction Manual

4.4 Setting the Password

Operations for
modifying the setting
contents
(See Section 2.1.3,
Operations for
modifying the setting
contents. )
(1) Overview
¡ You can set the password for the purpose of imposing restrictions on the
executable functions.
¡A string of 1 to 12 characters can be accepted as the password.
¡The acceptable password characters are 0-9 and A-Z.
¡The current password cannot be changed until you type and enter it.
¡The alphabetical characters used in the password are case-insensitive.
(2) Operating procedure
¡Changing the password from AYZ02 to CZB05
1 Choose Environment setup menu from the maintenance menu.
The "Environment setup menu" screen then opens.
Environment setup menu 2011.07.07 12:45
User environment
setup
Touch screen
setup
2 Press Password setup/update .
The "Password setup/update" screen then opens.
Password setup/update
Old password
New password
New password reentry
1 2
abc
123 ABC
Status: Stop
Date/time setup
environment setup
Password setup/
update
Status: Stop
2011.07.07 12:45
3 4 5 6 7
Com=0
Start Shut
up down

Comm

Manual
On/Off
Communication
Back
Com=0
8 9 0 Cancel
Back-
OK
space
Setting the Password 4-11