If A Warning Condition/Fault Occurs; Indications Given When A Warning Condition/Fault Occurs - Hitachi PB Series User Manual

6. If a Warning Condition/Fault
6.1
Section 6
Occurs
Indications Given When a Warning
Condition/Fault Occurs
When an warning condition or fault occurs, the warning or fault lamp comes on.
A confirmation message appears to indicate an operating error or to prompt for
process judgment.
When a "fault" occurs resulting in a printing failure while the LCD backlight is
extinguished, or when a "warning condition" exists calling for maintenance (no
printing failure), a window opens to display a fault or warning message.
The following on-screen indications are given.
1. When a fault occurs
When you press [Reset] after eliminating the cause, the fault condition
clears and the message disappears.
When you press [Erase message], the fault window clears but the fault
condition persists.
When a fault condition no longer exists, only the [Erase message] key is
displayed.

6.1 Indications Given When a Warning Condition/Fault Occurs

6–1