Operations for
modifying the setting
contents.
(See Section 2.1.3,
Operations for
modifying the setting
contents.
If the cursor is not
displayed, press
Show cursor .
Cursor will move to the
line you touched.
Selected item on the
cursor-positioned line
can be changed
by touching.
3-9
Setting Print Format
2 Operating procedure
¡Setting the line spacing to 1, character size to 5
space to 1, and character width increase to 2
1
From the "Print description" screen, press Print format .
The "Print format" screen then opens.
The on-screen cursor is positioned in the line spacing input field.
Print format
Message name
Column 1
Line spacing
Character size
Inter-char. space
Increased width
Bar code
(0:none
1
2
3
2
Press Previous item or Next item to select an item whose print
format is to be changed.
3
Press
or
4
Change the value as desired with a numeric key, Decrement key,
or Increment key.
5
Press Apply .
Print format
Message name
Column 1
6
Press Back .
You are then returned to the "Print description" screen.
¡To correct another column, press Previous item or Next item and
repeat steps 2 through 4 .
Status: Ready
2011.07.07 12:45
Column 2
Column 3
dots 0 2)
(1: 5 5 2
:5 8
3 : 7 10 4 :12 16 5 :18 24 6 : 24 32 )
dots 0 3
times 1 9
1:C39 2:ITF 3:NW-7 4:EAN-13 5:DM 6:C128)
4
5
6
7
8
to move the cursor to the setup item to be edited.
Status: Ready
2011.07.07 12:45
Column 2
Column 3
8, inter-character
Com=0
Start
Shut
up
down
Comm
Manual
On/Off
Show
cursor
Prev.
Next
item
item
9
0
Decre-
Incre-
Back
ment
ment
Com=0
Start
Shut
up
down
Comm
Manual
On/Off
Apply