Setting The Date And Time - Hitachi PXR-D Instruction Manual

4.3 Setting the Date and Time

When the password is
set up, the current time
cannot be changed.
Operations for
modifying the setting
contents
(See Section 2.1.3,
Operations for
modifying the setting
contents. )
(1) Overview
¡The time values to be printed can be set in accordance with the calendar time.
Either of the following two setup methods can be used.
Same as current
time
Clock stop
¡You can change the current time.
¡The year, month, day, hour, minute, and second values can be set.
¡You can choose between the 24-hour clock and 12-hour clock for setup purposes.
¡The current time can be set until the year 2079 comes.
NOTE If substitution rules are defined for year, do not select "Clock stop" to set a
year earlier than the current year. Even if you set such an earlier year, it is
replaced by a space.
(2) Operating procedure
¡Performing date/time setup so that "23:00, July 7, 2011" will be constantly printed.
1 Choose Environment setup menu from the maintenance menu.
The "Environment setup menu" screen then appears.
Environment setup menu 2011.07.07 23:45
User environment
setup
Touch screen
setup
¡The current time is used as the calendar time.
¡A predefined time is used as the calendar time.
¡You cannot set a time later than the current time.
Status: Ready
Communication
Date/time setup
environment setup
Password setup/
update
Com=0
Start Shut
up down
Comm
Manual
On/Off
Back
Setting the Date and Time 4-9