Displaying The Number Of Waiting Calls/Overload Display - Siemens HiPath 2000 Operating Instructions Manual

Step by Step
Displaying the number of waiting calls/
overload display
You can show the number of external waiting calls on
the display if you programmed the "View number of
calls" page 68 key.
R
Press the " Calls in Q" key.
If the number of waiting calls exceeds a preset limit
while you are engaged in another call (overload), the
LED on the key lights up. Contact your service person-
nel to find out the waiting call limit.
• LED off:
There are no waiting calls.
• LED is flashing slowly:
The set limit has been reached.
• LED is flashing quickly:
The limit has been exceeded (overload).
More functions/services
89