Testing The Phone; Phone Functions, Testing; Checking The Key Assignment - Siemens HiPath 2000 Operating Instructions Manual

Testing the phone

Step by Step
Phone test
Prog. feature key
Exit
122
Testing the phone

Phone functions, testing

You can test your phone's functionality.
Prerequisite: The phone is in idle mode.
N
Open the Program/Service menu
Select and confirm the option shown.
If everything is functioning correctly:
• all LEDs on the phone and on the key module flash
• your station number is displayed
• all pixels are active on the display
• the ring tone is audible

Checking the key assignment

You can check key assignment on your phone to deter-
mine which functions are assigned to which keys.
N
Open the Program/Service menu
Select and confirm the option shown.
S
Press any key. The key assignment is displayed.
Select and confirm the option shown.
page 29.
page 29.