Intended Use; Telephone Type; Voice Encryption; Speakerphone Quality And Display Legibility - Siemens HiPath 2000 Operating Instructions Manual

Intended use

The OpenStage phone is a desktop or wall-mounted unit designed for
speech transmission and for connection to the LAN. Any other use is re-
garded as unauthorized.

Telephone type

The identification details (exact product designation and serial number) of
your telephone can be found on the nameplate on the underside of the
base unit. Specific details concerning your communications platform can
be obtained from your service technician.
Please have this information ready when you contact our service depart-
ment regarding faults or problems with the product.

Voice encryption

Your OpenStage 40/40 G, software release 2 (V1 R2.xxxx) and later, sup-
ports voice encryption on HiPath 2000/3000/5000 (R 4 and later),
HiPath OpenOffice EE (V1). This allows you to use your OpenStage to per-
form tap-proof calls. Voice transmission is encrypted and data is decrypted
at the other call party's phone and vice versa.
If "Secure Mode" is enabled on your phone (consult your service person-
nel), and a connection is established to a phone that does not support
voice encryption, the call is not encrypted and thus unsecured.
Your service personnel can define at the communication system whether
you are notified of unencrypted calls and how

Speakerphone quality and display legibility

• To ensure good speakerphone quality, the area in front of the telephone
(front right) should be kept clear.
The optimum handsfree distance is 20 in. (50 cm).
• Proceed as follows to optimize display legibility:
– Turn the phone to tilt the display. This ensures you have a frontal view
of the display while eliminating light reflexes.
– Adjust the contrast as required
General information
page 78.
page 119.
11