Adding A New Contact (Korean Only) - Avaya one-X User Manual

Contacts
Note:
If you press the Contacts button and nothing happens, your system administrator has
disabled the button and its functionality.

Adding a new contact (Korean only)

You can add up to six numbers for a contact. Selecting "handle" as a type allows you to track the
contact's telephone presence, for example, not logged in, logged in, in use, or sending all calls
to another number. In Korean, one of two text input modes is available to enter the contact
name — Cin-Ji multi-tap (the default) allows you to enter a series of Hangul symbols, or you
can enter a contact name in English. The Add Contact screen shows Korean on the Abc/ABC/
abc/123 softkey when multi-tap is enabled. Press that softkey to toggle from Korean to English
and follow
1. Press Contacts.
2. Press New.
3. In Korean multi-tap, you can press a key multiple times to get the desired symbol
4. Enter the name using the dialpad. Press the number key that corresponds to the
5. Press More > Symbols to enter characters that are not on your dialpad, select the
6. Select the next field.
7. Enter the telephone number and press Primary if applicable. The primary number is
8. Select the next field.
9. Select the type of number entered ( work, mobile, home, handle). If you select
™
44 Avaya one-X Deskphone SIP for 9620 IP Telephone User Guide
Adding a new contact
in the contact name. The guidelines that follow in Step 4 apply.
symbol you want to enter until the desired character set or letter displays. Pause
before entering the next character/letter when the symbols are on the same key.
Note:
To enter a space, press #. Press Bksp to delete the last symbol. To remove a
symbol in the middle of the text you entered, use the left and right navigation
arrows to place your cursor after the character/symbol you want to remove. Once
your cursor is in the correct position, press Bksp to remove the character to the
left of the cursor. At any time, you can press Clear to delete all text and start over.
symbol you want to use, then press OK to select the symbol.
the one that will always display without having to go into contact details.
handle, provide a value that represents the extension number, an "at" @ symbol,
and the company name, for example, 21234@avaya.com. You can then determine
the contact's presence based on handle icons that appear next to this person's
name/number.
on page 40 instead of this procedure.
August 2008