Table Of The Functions Of The Panel's Led Indicators - EMS FirePoint System 5000 User Manual

EMS SYSTEM 5000

5 Table of the Functions of the panel's LED Indicators: -

LED Indicator
POWER
ZONE FAULT
GENERAL FAULT
ARE / BRIGADE FAULT
EARTH FAULT
ARE / BRIGADE
DISABLED
TEST MODE
SOUNDER & OUTPUTS
DISABLED
FIRE
SOUNDER FAULT
SYSTEM FAULT
DETECTOR/ZONE
DISABLED
Led Colour(s)
Indicates a good AC power supply.
Illuminates, should one of the
detection devices, develop a fault
condition.
Illuminates, should a fault condition
occur within a Control Panel or device.
Illuminates should a communication
fault occur between the Alarm Routing
equipment and the Control Panel.
Illuminates should an earth fault
condition occur on the system.
Illuminates when communication with
the Alarm Routing Equipment is
disabled
Illuminates whilst a device or
detection zone is in "TEST MODE".
Illuminates when an individual
Sounder/Output device or sounder
zone is disabled.
Illuminates when any device is in Fire
Alarm condition along with the fire
zonal LED.
Illuminates should a Sounder Based
Device indicates a fault condition.
Illuminates should a fault become
present with the control panel itself.
Illuminates when a Detection Device
or Zone is disabled.
Fig 3
Control Panel Function
USER MANUAL, ISSUE 2.4 – 19/11/09
6