On Position Functionality: (Access Level 2) - EMS FirePoint System 5000 User Manual

EMS SYSTEM 5000

6.2 ON Position Functionality: (Access Level 2)

The Control Panel requires the control keyswitch
turned to the "ON" Position, enabling Access Level 2: -
The key may not be removed when in this position.
Scroll Buttons
Reset/Led
Test
Silence Alarms
Sound Alarms
View Tests
View
Disablements
View Faults
View Fires
Status Lamps, N/A
(see fig 2)
N/A
System Menus
Operational
displayed to enable each event to be viewed.
This button has two functions. It is firstly
used to reset a Fire/Fault Event, after the
"Silence Alarm" button has been pressed and
the Fire/Fault condition has been cleared. It
is secondly used to test all of the Systems
Status Lamps. This is achieved by pressing
the button when the Systems Status is
normal, i.e. no events displayed.
This button Silences the System's Sounders
and internal buzzers. The panel will give an
intermittent beep every 10 – 15 seconds until
the condition is reset and will display Silence
Alarms when pressed.
This key is used for activating the System's
Sounders. The display will show Alarms
Sounded when pressed.
nd
2 Displays any device/zone currently in test.
Feature This will automatically timeout and return to
of key the front screen if left in this mode.
nd
2 Displays any device/zone currently disabled.
Feature This will automatically timeout and return to
of key the front screen if left in this mode.
nd
2 Displays
Feature condition. This will automatically timeout and
of key return to the front screen if left in this mode.
nd
2 Returns to view fire events if any of the other
Feature view options used. This will automatically
of key timeout and return to the front screen if left
in this mode.
Indicates the systems current status.
Options and further Fire system Options
Menus are now accessible by pressing the "0"
Key. Details are shown in Section 7.
ISOLATED
OFF
when multiple
any device currently
USER MANUAL, ISSUE 2.4 – 19/11/09
ON
ON position
events are
in fault
8