Using Team Functions; Turning Group Call On And Off - Siemens HiPath 2000 Operating Instructions Manual

Using Team Functions

Step by Step
rli qli w
or
rli
or
52
Using Team Functions

Turning Group Call On and Off

If this function has been configured (contact the service
personnel), you belong to one or more groups of users
who can each be reached under a hunt group or group
call number.
Incoming calls are signaled on all group member tele-
phones in the order in which they are received ( hunt
group) or simultaneously (= group call) until one mem-
ber of the group accepts the call.
You can also belong to a team (including executive/sec-
retary ones) to which multiple lines have been as-
signed. ! Page 55.
Each member of the group remains available under his
or her own station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group (in-
cluding an executive/secretary team).
You belong to a hunt group or a group call:
n
Lift the handset.
Enter the code for "leave" or "join".
You belong to multiple groups or to one group with
lines (including executive/secretary teams):
n
Lift the handset.
qli
Enter the code for "leave" or "join".
r w
Enter the code for "Leave all groups".
or
q w
Enter the code for "Join all groups.
or
o w
Enter a group/trunk number to directly "leave or join".
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) ! Page 57!