Relocating With The Telephone; Disconnecting The Telephone From Its Present Station Line; Reconnecting The Telephone At The New Station Line; Multi-Line And Team Functions - Siemens HOPATH 4000 Operating Instructions Manual

Relocating with the telephone

Step by Step
D
Enter the code!
D
Enter the code!
90 90 90 90
Relocating with the telephone
Check with your service personnel whether this is pos-
sible with your telephone system.
After consulting with your service personnel, you
can log off your telephone from its present station line
and then log it on at the new station line. Note that the
settings on your telephone (programmed keys) are not
affected by the move.
Disconnecting the telephone from its
present station line
Enter the code for logging off. If you are not sure of the
code, check with your service personnel.
D
Enter PIN.
Remove the telephone line cord from the jack.
Reconnecting the telephone at the
new station line
Insert the telephone line cord in the jack.
Enter the code for logging on. If you are not sure of the
code, ask with your service personnel.
D
Enter PIN.
If you relocate with both a first and a second tele-
phone (for example, executive/secretary configu-
ration), you must first log off from the second
telephone, then the first telephone. At the new
location, you log on the first telephone first, then
the second telephone (Not applicable in the US).

Multi-line and team functions