Table of Contents
Advertisement
Install the RAID Driver Using the F6 Installation Method
Perform the following steps to install the Intel Rapid Storage Technology
driver during operating system setup:
1.
Press F6 when you see a message in the status line that says, Press
F6 if you need to install a third party SCSI or RAID driver. This
message appears at the beginning of Windows XP* setup (during
text-mode phase).
Note: Nothing will happen immediately after pressing F6. Setup
will temporarily continue loading drivers. You will then be
prompted with a screen asking you to load support for mass
storage device(s).
2.
Press S to Specify Additional Device.
UNO-4683 User Manual
42
Advertisement
Table of Contents
