Table of Contents
Advertisement
Upgrading FortiGate-5001C firmware
Using the CLI to configure Transparent mode
Upgrading FortiGate-5001C firmware
30
To change the management IP address
1 Go to System > Dashboard > Status and select the Change link beside Operation
Mode: Transparent.
2 Change the Management IP/Netmask to the address and netmask hat you added to
Table 8 on page 29
and select Apply.
To configure the Primary and Secondary DNS server IP addresses
1 Go to System > Network > DNS.
2 Enter the Primary and Secondary DNS IP addresses that you added to
page 29
as required and select Apply.
1 Use the serial cable supplied with your FortiGate-5001C board to connect the
FortiGate-5001C Console port to the management computer serial port.
2 Start a terminal emulation program (HyperTerminal) on the management computer.
Use these settings:
Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None.
3 At the Login: prompt, type admin and press Enter twice (no password required).
4 Change from NAT/Route mode to Transparent mode. Configure the Management IP
address and default gateway to the settings that you added to
config system settings
set opmode transparent
set manageip <mng_ip>/<netmask>
set gateway <gateway_ip>
end
5 Configure the primary and secondary DNS server IP addresses to the settings that
you added to
Table 8 on page
config system dns
set primary <dns-server_ip>
set secondary <dns-server_ip>
end
Fortinet periodically updates the FortiGate-5001C FortiOS firmware to include
enhancements and address issues. After you have registered your FortiGate-5001C
security system (see
"Registering your Fortinet product" on page
FortiGate-5001C firmware from the support web site http://support.fortinet.com.
Only FortiGate-5001C administrators (whose access profiles contain system read and
write privileges) and the FortiGate-5001C admin user can change the FortiGate-5001C
firmware.
For complete details about upgrading and downgrading FortiGate-5001C firmware using
the web-based manager or CLI; and using a USB key, see the
Firmware and FortiUSB
Guide.
To upgrade the firmware using the web-based manager
1 Copy the firmware image file to your management computer.
2 Log into the web-based manager as the admin administrator.
29.
FortiGate-5001C Security System Guide
Quick Configuration Guide
Table 8 on
Table 8 on page
29.
23) you can download
FortiGate-5000 Series
01-400-181221-20121130
http://docs.fortinet.com/
Advertisement
Table of Contents
