Fortinet FortiManager-400 Quick Start Manual

FortiManager Server LED Indicators
LED State
Green
Power
Off
Amber
Flashing
All Ports
Green
Off

Checking the Package Contents

Esc
LCD Control
Buttons
Connector
Port 1
Ports 2,3,4
CONSOLE
Connecting
Connect the FortiManager System to a power outlet and to the internal and external networks.
• Place the unit on a stable surface. It requires 1.5 inches (3.75 cm) clearance above and
on each side to allow for cooling.
• Alternatively, Mount the unit in a standard 19-inch rack. The FortiManager 400 system
requires 1 U of vertical space in the rack.
• Connect the network cable to interface 1.
To power up the FortiManager Server, connect the power cables to the power outlets.
After a few seconds, SYSTEM STARTING appears on the LCD. The menu selections appear
when the unit is up and running.
If you connect only one power source, an audible alarm sounds to indicate a failed power
supply. To stop this alarm, press the red alarm cancel button on the rear panel next to the
power supply inputs.

Planning the Configuration

The FortiManager System is an integrated management and monitoring tool that consists of
one or more FortiManager Servers and managed FortiGate and FortiAnalyzer devices.
The FortiManager Server manages communication between FortiGate devices, and a
FortiAnalyzer device. The FortiManager Server stores and manages all FortiGate device
configurations. It can also act as an on-site FDN server for the FortiGate devices to down-
load virus and attack signatures, and to use the web filtering and antispam service. The
FortiManager Server can also connect to a FortiAnalyzer unit for managing and monitoring
logs and reports for all managed FortiGate devices.

Factory Defaults

User name:
Administrator Account
Password:
IP:
Port 1 Netmask:
Management Access:
IP:
Port 2 Netmask:
Management Access:
IP:
Port 3 Netmask:
Management Access:
IP:
Port 4 Netmask:
Management Access:
Description
The FortiManager Server unit is powered on.
The FortiManager Server unit is powered off.
The correct cable is in use and the connected equip-
ment has power.
Network activity at this interface.
The interface is connected at 100 Mbps.
No link established.
Front
CONSOLE 1 2 3 4
Enter
Serial Ports Power
Console 1, 2, 3, 4 Light
Type Speed
RJ-45 10/100 Base-T
RJ-45 10/100 Base-T
DB-9 9600 bps
admin
(none)
192.168.1.99
255.255.255.0
ping, https, http, ssh
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
© Copyright 2006 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trade-
marks of their respective holders.
Regulatory Compliance
FCC Class A Part 15 CSA/CUS
06 October 2006
Removable
Hard Drive
Protocol Description
Ethernet Connection to the network
Ethernet For future use.
RS-232 serial Optional connection to the management computer.
Provides access to the command line interface (CLI).
CONSOLE
Esc Enter
Back
Power Power
Switch Connection
Straight-through Ethernet cable connects to
hub or switch on the network
CONSOLE
Esc Enter
DB-9 console cable connects
to serial port on management computer
Power cable connects to power outlet
1 2 3 4 / HA
FortiManager 400
02-30002-0242-20061006
Ethernet Cables:
Orange - Crossover
Grey - Straight-through
DB-9 Console
Cable
Power Cable
Rack-Mount Brackets
Q u i c k S t a r t G u i d e
Esc Enter CONSOLE 1 2 3 4 / HA
FortiManager 400
Copyright 2006 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
Documentation
For future use
1 2 3 4