Fortinet FortiManager-400A Quick Start Manual

FortiManager Server LED Indicators
LED State
Green
Power
Off
Amber (Left LED)
Flashing Amber
(Left LED)
All Ports
Off (Right LED)
Green (Right LED)
Red (Right LED)

Checking the Package Contents

Esc Enter
Control
LCD
Buttons
Power
Connector
Port 1
Ports 2,3,4
Ports 5 and 6
CONSOLE
Connecting
Connect the FortiManager System to a power outlet and to the internal and external networks.
• Place the unit on a stable surface. It requires 1.5 inches (3.75 cm) clearance above and
on each side to allow for cooling.
• Alternatively, Mount the unit in a standard 19-inch rack. The FortiManager 400 system
requires 1 U of vertical space in the rack.
• Connect the network cable to interface 1.
To power up the FortiManager Server, connect the power cables to the power outlets.
After a few seconds, SYSTEM STARTING appears on the LCD. The menu selections appear
when the unit is up and running.
If you connect only one power source, an audible alarm sounds to indicate a failed power
supply. To stop this alarm, press the red alarm cancel button on the rear panel next to the
power supply inputs.

Planning the Configuration

The FortiManager System is an integrated management and monitoring tool that consists of
one or more FortiManager Servers and managed FortiGate and FortiAnalyzer devices.
The FortiManager Server manages communication between FortiGate devices, and a
FortiAnalyzer device. The FortiManager Server stores and manages all FortiGate device
configurations. It can also act as an on-site FDN server for the FortiGate devices to down-
load virus and attack signatures, and to use the web filtering and antispam service. The
FortiManager Server can also connect to a FortiAnalyzer unit for managing and monitoring
logs and reports for all managed FortiGate devices.

Factory Defaults

User name:
Administrator Account
Password:
IP:
Port 1 Netmask:
Management Access:
IP:
Port 2 Netmask:
Management Access:
IP:
Port 3 Netmask:
Management Access:
IP:
Port 4 Netmask:
Management Access:
Description
The FortiManager Server unit is powered on.
The FortiManager Server unit is powered off.
The correct cable is in use and the connected equipment
has power.
Network activity at this interface.
The interface is connected at 10 Mbps.
The interface is connected at 100 Mbps.
Ports 5 and 6 are connected at 1000 Mbps.
Front
-
CONSOLE USB 10/100 10/100/1000
1 2 3 4 5 6
Port1
Serial
Port 5,6
Console
(Future use)
Port 2,3,4
USB
LED HA
Type Speed
RJ-45 10/100 Base-T
RJ-45 10/100 Base-T
RJ-45 10/100/1000 Base-T Ethernet
RJ-45 9600 bps
admin
(none)
192.168.1.99
255.255.255.0
ping, https, http, ssh
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
© Copyright 2007 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trade-
marks of their respective holders.
Regulatory Compliance
FCC Class A Part 15 CSA/CUS
27 April 2007
Back
Protocol Description
Ethernet Connection to the network
Ethernet For future use.
For future use.
RS-232 serial Optional connection to the management computer.
Provides access to the command line interface (CLI).
Straight-through Ethernet cable connects
CONSOLE USB
Esc Enter
FortiManager 400A
02-30003-0243-20070427
Power
Power
Switch
Connection
-
CONSOLE USB 10/100
Esc Enter
1 2
to hub or switch on the network
Power cable connects to power outlet
10/100 10/100/1000
1 2 3 4 5 6
Ethernet Cables:
Orange - Crossover
Grey - Straight-through
RJ-45 to
DB-9 Console Cable
Power Cable
Rack-Mount Brackets
Q u i c k S t a r t G u i d e
CONSOLE USB 10/100 10/100/1000
Esc Enter 1 2 3 4 5 6
FortiManager 400A
Copyright 2006 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
Documentation
10/100/1000
3 4 5 6
(Future use)
Ethernet for high
availability connections