Using Mute; Transferring A Connected Call - Cisco 7961G-GE Phone Manual

Using Mute

Mute disables the audio input for your phone. With Mute enabled, you can hear other parties on a call
but they cannot hear you.
If you want to...
Toggle Mute on
Toggle Mute off

Transferring a Connected Call

Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to...
Transfer a call without
talking to the transfer
recipient
Talk to the transfer
recipient before transferring
a call (consult transfer)
Transfer two current calls
to each other (direct
transfer)
Send a call to your voice
messaging system
Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
Then...
Press .
Press .
Then...
Press Transfer and enter the target number. When you hear the call
ringing, hang up. (If your system administrator did not enable on-hook
transfer on your phone, you must press Transfer again to complete the
transfer.)
To cancel the transfer, press EndCall.
Press Transfer and enter the target number. Wait for the transfer
recipient to answer. If the recipient accepts the transferred call, hang
up. (If your system administrator did not enable on-hook transfer on
your phone, you must press Transfer again to complete the transfer.)
If the recipient refuses the call, press Resume to return to the original
call.
To cancel the transfer, press EndCall.
Scroll to highlight any call on the line and press Select. Repeat this
process for the second call. With one of the selected calls highlighted,
press DirTrfr. (You might need to press more to see DirTrfr.) The two
calls connect to each other and drop you from the call.
If you want to stay on the line with the callers, use Join to create a
conference instead. For details, see the "Making Conference Calls"
section on page 31.
Press iDivert. The call is automatically transferred to your voice
message greeting. You can use iDivert with a call that is active, ringing,
or on hold.
29