Motorola NVG510 Administrator's Handbook page 65

The following is an example log portion saved as a .TXT file:
P0000-00-00T00:00:08 L6 sdb[306]: log buffer size set to 8192
P0000-00-00T00:00:08 L7 sdb[306]: libmotopia: Closing /dev/motopia
P0000-00-00T00:00:08 L7 sdb[306]: Loading platform module bcm_enet
P0000-00-00T00:00:08 L6 sdb[306]: SSL CA-root-cert directory is ready.
P0000-00-00T00:00:08 L6 sdb[306]: Hardware is 'NVG510'
P0000-00-00T00:00:09 L6 sdb[306]: S/N 157978490448, SKU 64
P0000-00-00T00:00:12 L5 sdb[306]: Wireless subsystem found
P0000-00-00T00:00:15 L5 sdb[306]: VOIP subsystem found
P0000-00-00T00:00:15 L7 sdb[306]: nm_add_supp1x entrypoint
P0000-00-00T00:00:15 L7 sdb[306]: netfilter: redirect object not found. skip prerouting rules
P0000-00-00T00:00:17 L3 sdb[306]: scheduler: no ntp object
P0000-00-00T00:00:17 L6 sdb[306]: ip6.route[1]: Setting state from 'unset' to 'down'
P0000-00-00T00:00:18 L5 sdb[306]: skip authorization-delay timer. not defaulted
P0000-00-00T00:00:18 L3 sdb[306]: ELAN: Error creating 'enet' 'power-save' object: Item not
found
P0000-00-00T00:00:18 L7 sdb[306]: Wi-Fi: Taking down phy.wl80211 interface wl0
P0000-00-00T00:00:18 L6 sdb[306]: Wi-Fi: Adding wireless port ssid-1 (wl0)
P0000-00-00T00:00:18 L6 sdb[306]: Wi-Fi: Adding wireless port ssid-2 (wl0.1)
P0000-00-00T00:00:18 L6 sdb[306]: Wi-Fi: Adding wireless port ssid-3 (wl0.2)
P0000-00-00T00:00:18 L6 sdb[306]: Wi-Fi: Adding wireless port ssid-4 (wl0.3)
P0000-00-00T00:00:18 L5 sdb[306]: DSL: EOC version 157978490448:NVG510:905012
P0000-00-00T00:00:18 L7 sdb[306]: enabling vc[1]
P0000-00-00T00:00:19 L5 sdb[306]: voipexe start returned ret=0
P0000-00-00T00:00:19 L5 sdb[306]: skip authorization-delay timer. not defaulted
P0000-00-00T00:00:19 L4 sdb[306]: Configured for IPDSLAM mode
P0000-00-00T00:00:19 L3 sdb[306]: start[8024] end[8036]
P0000-00-00T00:00:19 L6 sdb[306]: validate <basic> queue(1)
P0000-00-00T00:00:19 L6 sdb[306]: validate <basic> queue(2)
P0000-00-00T00:00:19 L6 sdb[306]: validate <basic> queue(3)
P0000-00-00T00:00:19 L6 sdb[306]: validate <basic> queue(4)
P0000-00-00T00:00:19 L6 sdb[306]: validate <basic> queue(5)
P0000-00-00T00:00:19 L6 sdb[306]: validate <basic> queue(6)
P0000-00-00T00:00:19 L6 sdb[306]: validate <priority> queue(7)
P0000-00-00T00:00:19 L6 sdb[306]: ip6_set_proc: setting </proc/sys/net/ipv6/conf/all/
disable_ipv6> to '1'
P0000-00-00T00:00:19 L6 sdb[306]: ip6_set_proc: setting </proc/sys/net/ipv6/conf/default/
disable_ipv6> to '1'
P0000-00-00T00:00:19 L6 sdb[306]: ip6_set_proc: setting </proc/sys/net/ipv6/conf/all/
forwarding> to '0'
P0000-00-00T00:00:23 L7 sdb[306]: Wi-Fi: First apply - apply everything
P0000-00-00T00:00:23 L7 sdb[306]: Wi-Fi: NAS daemon not found, not killing
P0000-00-00T00:00:23 L7 sdb[306]: Wi-Fi: Taking down phy.wl80211 interface wl0
P0000-00-00T00:00:23 L7 sdb[306]: Wi-Fi: Bringing up phy.wl80211 interface wl0
P0000-00-00T00:00:23 L6 sdb[306]: Wi-Fi: Starting autochannel scan...
P0000-00-00T00:00:24 L7 sdb[306]: Wi-Fi: SIOCDEVPRIVATE ioctl cmd=215 failed: Bad Argument
P0000-00-00T00:00:26 L6 sdb[306]: Wi-Fi: Autochannel found channel 11019
P0000-00-00T00:00:26 L7 sdb[306]: Wi-Fi: Taking down phy.wl80211 interface wl0
P0000-00-00T00:00:26 L7 sdb[306]: Wi-Fi: Bringing up phy.wl80211 interface wl0
P0000-00-00T00:00:26 L7 sdb[306]: Wi-Fi: Setting kernel ip link wl0 to up
P0000-00-00T00:00:26 L7 sdb[306]: Wi-Fi: Setting kernel ip link wl0.1 to down
P0000-00-00T00:00:26 L7 sdb[306]: Wi-Fi: Setting kernel ip link wl0.2 to down
P0000-00-00T00:00:26 L7 sdb[306]: Wi-Fi: Setting kernel ip link wl0.3 to down
P0000-00-00T00:00:26 L6 sdb[306]: Wi-Fi: EAPD daemon started (pid: 1030)
P0000-00-00T00:00:26 L6 sdb[306]: Wi-Fi: NAS daemon started, bringing up phy.wl80211.ssid[1]
P0000-00-00T00:00:26 L7 sdb[306]: Port ssid-1 sending UP event
P0000-00-00T00:00:26 L6 sdb[306]: DSL: Vectoring function is not supported.
P0000-00-00T00:00:26 L6 sdb[306]: DSL: Warning: PTM only.
P0000-00-00T00:00:27 L6 sdb[306]: DSL: set the NLNM Threshold value
...
65