Motorola NVG510 Administrator's Handbook page 34

Administrator's Handbook
Link: Configure
Configure
link, the Configure page for the Ethernet LAN appears.
When you click the
For each Ethernet Port, 1 through 4, you can select:
Ethernet – auto (the default self-sensing rate), 10M full- or half-duplex, 100M full- or half-duplex, or 1G full- or
N
half-duplex.
MDI-X – auto (the default self-sensing crossover setting), off, or on.
N
You can also enable or disable IPv6 if your LAN devices support or require it. Select On or Off from the pull-down
menu.
Save
Click the button.
34