Motorola NVG510 Administrator's Handbook page 71

LED
Solid Green
= IP connected (The device has a WAN IP address from DHCP or 802.1x
authentication and the broadband connection is
up).
Flashing Green
= Attempting PPP connection. Attempting IEEE 802.1X authentication or
Service attempting to obtain DHCP information.
Red
= Device attempted to become IP connected and failed (no DHCP response, no PPPoE
response, 802.1x authentication failed, no IP address from IPCP, etc.). The Red state times
out after two minutes and the Service indicator light returns to the Off state.
Off = The device is not powered or the broadband connection is not present.
Solid Green = The associated VoIP line has been registered with a SIP proxy server.
Phone 1, 2
Flashing Green = Indicates a telephone is off-hook on the associated VoIP line.
Off = VoIP not in use, line not registered or Gateway power off.
Motorola® Gateway NVG510 Rear View
DSL Port Ethernet Ports
Phone Port
(use splitter for
2 phones)
Action
WPS Pushbutton DC Power Port
Factory Reset Switch
71