Motorola NVG510 Administrator's Handbook page 125

set voip phone n sip-advanced-setting sip-qos-p-bit-value [ 0 - 7 ]
Sets a QoS P-bit value for the SIP session. Default is 6.
set voip phone n sip-advanced-setting sip-qos-marker-value value
Sets a QoS marker on the SIP session packets on the specified phone line.
set voip phone n sip-advanced-setting rtp-qos-tos-value [ 0 - 255 ]
Specifies the RTP Diff-Serv Type of Service (ToS) values for Quality of Service (QoS) assignment. Default is 184.
set voip phone n sip-advanced-setting rtp-qos-p-bit-value [ 0 - 7 ]
Sets a QoS P-bit value for the RTP session. Default is 6..
set voip phone n sip-advanced-setting rtp-qos-marker-value value
Sets a QoS marker on the RTP session packets on the specified phone line.
set voip phone n sip-advanced-setting fax-redundancy-level [ 0 - 1 ]
Specifies the level of fax redundancy for t38 fax data rate management.
set voip phone n sip-advanced-setting sip-init-de-register [ off | on ]
Turns SIP de-registration on or off. Default is off.
set voip phone n sip-advanced-setting sip-known-ip-list string
Specifies a known IP address list of SIP servers for the SIP session.
Advanced telephony settings
The telephony features include advanced settings for fine tuning phone behavior. The following codecs and asso-
ciated value defaults are supported:
Codec G711U
packetization-time 20
jitter-max-reorder-delay 50
jitter-max-accept-late-seq- 200
num
jitter-initial-delay 80
jitter-exe-frame-del-mode off
jitter-max-transit-delay 250
jitter-peak-transit-delay 475
jitter-delay-buff-inc 10
jitter-transit-delay-threshold 10000
Codec G711A Codec G729 Codec G726_16
20 20 20
50 50 50
200 200 200
80 80 80
off off off
250 250 250
475 475 475
10 10 10
10000 10000 10000
125