Motorola NVG510 Administrator's Handbook page 73

Solid Green Flashing
=
Green
Good broad-
band connec- Attempting
tion (i.e., good broadband con-
DSL Sync). nection (i.e.,
DSL attempt-
ing sync).
Broadband
Solid Green = Flashing
IP connected Green
(The device has Attempting PPP
a WAN IP connection.
address from Attempting
DHCP or IEEE 802.1X
802.1x authen- authentication
tication and the or attempting to
broadband con- obtain DHCP
nection is up). information.
Service
Flashing Flashing Red
Green Red
= & = = No DSL sig-
If the broad- nal on the line.
band connec- This is only
tion fails to be used when
established for there is no sig-
more than three nal, not during
consecutive times of tempo-
minutes the rary 'no tone'
LED switches during the train-
Flashing
to ing sequence.
Green
when
attempting or
waiting to
establish a
broadband con-
nection alter-
nating with a
five second
steady Red.
This pattern
continues until
the broadband
connection is
successfully
established.
Red = Device
= attempted to
become IP con-
nected and
failed (no
DHCP
response, no
PPPoE
response,
802.1x authen-
tication failed,
no IP address
from IPCP,
etc.). The Red
state times out
after two min-
utes and the
Service indica-
tor light returns
to the Off state.
Off = The
device is not
powered.
Off = The
device is not
powered or the
broadband con-
nection is not
present.
73