Motorola Netopia 2200 Series User Manual page 297

CONFIG Commands
•
inband: sends the DTMF digits as a normal inband tone.
•
rfc2833: sends the DTMF digits as an event as part of the RTP packet header
information.
• info: sends the DTMF digits in the SIP INFO message.
set voip phone [ 0 | 1 ] sip-advanced-setting sip-end-of-dial-marker
[ off | on ]
sip-end-of-dial-marker – turns an "end of dial" (#) signal that indicates that the dialed
number is complete on or off.
set voip phone [ 0 | 1 ] sip-advanced-setting call-feature
call-forwarding-all-option [ off | on ]
call-forwarding-all-option – turns unconditional call forwarding on or off.
set voip phone [ 0 | 1 ] sip-advanced-setting call-feature
call-forwarding-all-number phone_number
call-forwarding-all-number – specifies the number to which calls are to be forwarded
when call-forwarding-all-option is on.
set voip phone [ 0 | 1 ] sip-advanced-setting call-feature
call-forwarding-on-busy-option [ off | on ]
call-forwarding-on-busy-option – turns call forwarding when the line is busy on or off.
set voip phone [ 0 | 1 ] sip-advanced-setting call-feature
call-forwarding-on-no-answer-option [ off | on ]
call-forwarding-on-no-answer-option – turns call forwarding when there is no answer
on or off.
set voip phone [ 0 | 1 ] sip-advanced-setting call-feature
call-forwarding-on-no-answer-number phone_number
call-forwarding-on-no-answer-number – specifies the number to which calls are to be
forwarded when call-forwarding-on-no-answer-option is on.
297