Motorola Netopia 2200 Series User Manual page 272

set system password { admin | user }
Specifies the administrator or user password for a Motorola Netopia® Gateway. When you
enter the set system password
word (if any) and new password. You are prompted to repeat the new password to verify
that you entered it correctly the first time. To prevent anyone from observing the password
you enter, characters in the old and new passwords are not displayed as you type them.
For security, you cannot use the "step" method to set the system password.
A password can be as many as 8 characters. Passwords are case-sensitive.
Passwords go into effect immediately. You do not have to restart the Motorola Netopia®
Gateway for the password to take effect. Assigning an administrator or user password to a
Motorola Netopia® Gateway does not affect communications through the device.
set system heartbeat option { on | off }
protocol [ udp | tcp ]
port-client [ 1 - 65535 ]
ip-server [ ip_address | dns_name ]
port-server [ 1 - 65535 ]
url-server (" server_name ")
number [ 1 – 1073741823 ]
interval (00:00:00:20)
sleep (00:00:30:00)
contact-email (" string @ domain_name ")
location (" string "):
The heartbeat setting is used in conjunction with the configuration server to broadcast con-
tact and location information about your Gateway. You can specify the protocol, port, IP-,
port-, and URL-server.
• The interval setting specifies the broadcast update frequency. Part of sequence con-
trol. The interval is the spacing between heartbeats, in d:h:m:s.
•
The contact-email setting is a quote-enclosed text string giving an email address for
the Gateway's administrator.
•
The location setting is a text string allowing you to specify your geographical or other
location, such as "Secaucus, NJ."
• The number setting is part of the sequence control. This is the number of heartbeats
to send, at each "interval", before sleeping. For example, if this is 20, in the above lay-
272
command, you are prompted to enter the old pass-