Physical Description; Front Panel Components - Fortinet FortiSwitch-5003B System Manual

FortiSwitch-5003B system

Physical description

Front panel components

FortiSwitch-5003B System Guide
01-400-134822-20120216
http://docs.fortinet.com/
• Eight front panel fabric backplane 10-gigabit SFP+ interfaces (F1 to F8) that connect
to the fabric backplane channel. These interfaces can also be configured to operate
as 1-gigabit SFP interfaces.
By default on FortiSwitch-5003B boards with part number P11000-01 and up the F8
interface is activated but it can be deactivated (see
interface and enabling the fabric backplane interconnect (slot-1/2)" on page
• One 1-gigabit dedicated management Ethernet interface (MGMT). This interface is for
management purposes only and cannot forward traffic.
• One RJ-45, RS-232 serial console connection (CONSOLE).
• Mounting hardware.
• LED status indicators.
• IEEE 802.1q VLANs.
• IEEE 802.3ad link aggregation (LACP).
• Link aggregation using a hash algorithm based on source and destination IP
addresses.
• Multiple Spanning Tree Protocol (MSTP) (IEEE 802.1s) to support redundant
FortiSwitch-5003B boards and external MSTP-compatible switches.
• Heartbeat between a FortiGate-5000 board and the FortiSwitch-5003B board over the
fabric channel.
• Standard FortiOS web-based manager and command line interface (CLI) for
configuring fabric switch settings (VLANs, MSTP, trunks, and so on).
Table 2: FortiSwitch-5003B board physical description
Dimensions
Weight
Operating Temperature 32 to 104°F (0 to 40°C)
Storage Temperature
Relative Humidity
Power consumption
Max Current
Heat Dissipation
From the FortiSwitch-5003B font panel you can view the status of the board LEDs to
verify that the board is functioning normally.
The front panel also contains connectors to the fabric and base channels, an out of band
management Ethernet interface, and an RJ-45 RS-232 console port for connecting to the
FortiSwitch-5003B CLI.
1.2 x 11.7 x 13.8 in. (3.1 x 29.6 x 35.1 cm) (Height x Width x
Depth)
8.6 lb. (3.9 kg)
-13 to 158°F (-35 to 70°C)
5 to 90% (Non-condensing)
Maximum: 180WDC; Average: 150WDC
3.75A
614BTU/h
Physical description
"Disabling the front panel F8
33).
7