Advertisement
Package Contents
EXT1 and
INT1 and
EXT2
Reset1
INT2
Mode1
INT1
EXT1
FortiBridge 2002
MODEM1
MGMT1
MODEM2
CONSOLE1
CONSOLE2
INT1
EXT1
HA1
BYPASS1
USB1
USB2
MODE1
RESET1
INT2
FortiGate
EXT2
INT2
EXT2
PWR1
NORMAL1
Modem1
Modem2
LEDs
USB1
LEDs
USB2
Management1
Management2
Console1
Console2
DISCONNECT TWO POWER SUPPLY CORDS
BEFORE SERVICING
Power button
Ground
AC power
connection
Tools and Documenation
Power cable x2
DB9-RJ45 Serial
Straight-through
Ethernet cable
cable
Factory Defaults
Administrator user name
admin
Administrator password
(none)
NAT/Route mode
Management1
192.168.1.99
Management2
0.0.0.0
To reset the unit to the factory defaults, in the CLI type the command:
execute factoryreset
LED Description
LED
Power
EXT3 and
INT3 and
Reset2
INT4
EXT4
Mode2
Normal
INT3
EXT3
MGMT2
INT3
EXT3
HA2
BYPASS2
MODE2
RESET2
INT4
FortiGate
EXT4
INT4
EXT4
PWR2
NORMAL2
HA
LEDs
LEDs
Bypass
DISCONNECT TWO POWER SUPPLY CORDS
BEFORE SERVICING
Power button
AC power
connection
INT and
EXT LEDs
QuickStart Guide
FortiGate-30B
INT1
EXT1
INT3
EXT3
FortiBridge 2002
CONSOLE1
MODEM1
MGMT1
INT1
EXT1
CONSOLE2
MODEM2
MGMT2
INT3
EXT3
USB1
HA1
BYPASS1
MODE1
RESET1
USB2
HA2
BYPASS2
MODE2
RESET2
INT2
INT2
FortiGate
EXT2
EXT2
PWR1
NORMAL1
INT4
INT4
FortiGate
EXT4
EXT4
PWR2
NORMAL2
REGISTER
Copyright 2010 Fortinet Incorporated. All rights reserved.
Trademarks
INT,
Products mentioned in this document are trademarks.
EXT, and
MANAGE-
MENT
Ports
State
Description
Green
The unit is powered on.
Off
The unit is powered off.
Green
The unit is being used in Normal
mode.
Green
The unit is being used in a HA cluster.
Off
The unit is in stand-alone mode.
Green
Bypass network activity at this inter-
face.
Off
Normal status.
Green
The correct cable is in use and the
connected equipment has power.
Green flashing
Network data is being sent or re-
ceived.
Off
No link established or the interface
has been turned off.
Link/Activity (left) Green
Port has power and network connec-
tion.
Link/Activity (left) Green
Network data is being sent or re-
flashing
ceived.
Speed (right) indicator is
Connected at 1000 Mbps.
Green
Speed (right) indicator is
The interface is connected at 100
Amber
Mbps.
Speed (right) indicator
The interface is connected at 10
is Off
Mbps.
Interface Description
Interface
Type
Speed
Proto-
col
Console1
RJ-45
9600 bps
RS-232
and Con-
8/N/1
serial
sole2
Modem1
RJ-11
and Mo-
dem2
USB1 and
USB
USB
USB2
Manage-
RJ-45
10/100/1000
Ethernet Two management ports.
ment1 and
Base-T
Manage-
ment2
INT1, INT2,
RJ-45
10/100/1000
Ethernet Ingress and Egress ports.
INT3, INT4,
Base-T
EXT1,
EXT2,
EXT3,
EXT4
Connecting
Connect the FortiBridge unit to the internal and external networks and the Forti-
Gate unit. Normally, you would use straight-through ethernet cables to connect
the FortiBridge unit. However, for some connections you may need a crossover
ethernet cable (for example, for compatibility with network devices that do not
support Auto MDI/MDIX).
•
Connect the FortiBridge INT 2 interface to the FortiGate unit internal inter-
face.
•
Connect the FortiBridge EXT 2 interface to the FortiGate unit external
interface.
•
Connect the FortiBridge INT 1 interface to the internal network.
•
Connect the FortiBridge EXT 1 interface to the external network.
•
Turn on the FortiGate unit and any network equipment that was turned off.
•
Connect the power cords at the back of the FortiBridge unit. Plug the other
end of the power cables into a grounded electrical outlet.
•
The PWR and Bypass Mode LEDs turn on. After a short time, the Forti-
Bridge unit switches to Normal mode. The Bypass LED turns off and the
Normal LED turns on.
Description
Connection to the manage-
ment computer. Provides
access to the command line
interface (CLI).
Phone line for internal
modem.
Two optional connections to
a USB key for installation.
Advertisement
