Upgrading Fortiswitch-5000 Series Firmware - Fortinet FortiSwitch-5003B System Manual

Upgrading FortiSwitch-5000 series firmware

Upgrading FortiSwitch-5000 series firmware
32
7 To configure base channel interface physical port settings, enter:
config switch base-channel physical-port
edit slot-3
set status up
next
end
8 To configure base channel interface native VLANs, enter:
config switch base-channel interface
edit slot-5
set native-vlan 23
next
end
9 To configure fabric channel interface physical port settings, enter:
config switch fabric-channel physical-port
edit slot-3
set status up
next
end
10 To configure base channel interface native VLANs, enter:
config switch fabric-channel interface
edit slot-5
set native-vlan 23
next
end
Fortinet periodically updates the FortiSwitch-5003B FortiOS firmware to include
enhancements and address issues. After you have registered your FortiSwitch-5003B
security system (see "Registering your Fortinet product" on page
FortiSwitch-5003B firmware from the support web site http://support.fortinet.com.
To upgrade the firmware from the web-based manager
1 Go to System > Status > Dashboard > System Information.
2 Select Update beside Firmware Version.
To upgrade the firmware from the CLI
To use the following procedure, you must have a TFTP server the FortiSwitch-5003B
board can connect to.
1 Make sure the TFTP server is running.
2 Copy the new firmware image file to the root directory of the TFTP server.
3 Log into the FortiSwitch-5003B CLI.
4 Make sure the FortiGate board can connect to the TFTP server.
You can use the following command to ping the computer running the TFTP server.
For example, if the IP address of the TFTP server is 192.168.1.168:
execute ping 192.168.1.168
Quick Configuration Guide
29) you can download
FortiSwitch-5003B System Guide
01-400-134822-20120216
http://docs.fortinet.com/