Fortinet FortiSwitch-5003B System Manual page 8

Front panel components
8
Table 3: FortiSwitch-5003B front LEDs
LED State
Green
Fabric
Flashing
(1/2 to 14)
Green
Off
Green
Flashing
Base (1/2 to 14)
Green
Off
Off
OOS
Amber
(Out of Service)
PWR (Power) Green
Off
Flashing
STA (Status)
Green
Off or
Flashing
green
ACC (Disk
activity)
Not used in the default configuration. See
SH1
LEDs" on page
Green or
Flashing
Green
SH2
Green
F1 to F8 Flashing
Green
Off
Description
Fabric backplane interface is connected at 10 Gbps or
1 Gbps.
Network activity at the fabric backplane interface.
No link is established.
Base backplane interface is connected at 1 Gbps.
Network activity at the base backplane interface.
No link is established.
Normal operation.
A fault condition exists and the FortiSwitch-5003B blade
is out of service (OOS). This LED may also flash very
briefly during normal startup.
The FortiSwitch-5003B board is powered on.
The FortiSwitch-5003B board is powered on.
The FortiSwitch-5003B is starting up. If this LED is
flashing at any time other than system startup, a fault
condition may exist.
The ACC LED flashes green when the FortiSwitch-5003B
board accesses the flash disk. The flash disk stores the
current firmware build and configuration files. The
system accesses the flash disk when starting up, during
a firmware upgrade, or when an administrator is using
the CLI or GUI to change the FortiSwitch-5003B
configuration. Under normal operating conditions this
LED flashes occasionally, but is mostly off.
9.
Network activity between the FortiSwitch-5003B board
and one of the shelf managers across the chassis
backplane. If the FortiSwitch-5003B board is installed in
chassis slot 1, this LED indicates a connection to shelf
manager 2. If the FortiSwitch-5003B board is installed in
chassis slot 2, this LED indicates a connection to shelf
manager 1.
The correct cable is connected to the fabric channel
interface and the connected equipment has power.
Network activity at the fabric channel interface.
No link is established.
FortiSwitch-5003B system
"About the SH1 and SH2
FortiSwitch-5003B System Guide
01-400-134822-20120216
http://docs.fortinet.com/