Trash Bucket; Remove; Bucket Handle; Remove And Replace - Broan Elite 15XEWH Service Manual

8
Section B – Cabinet

Trash Bucket

REMOVE

To remove the bucket completely from the cabinet for
repairs or cleaning, follow these instructions.
1. Pull out trash bucket until it stops.
2. Remove one screw from each of the bucket slides.
3. Press down on left and right bucket slide release tabs
while pulling the bucket out of the cabinet.
3.
BUCKET SLIDE
RELEASE TAB
SCREW
2.

Bucket Handle

REMOVE AND REPLACE

The plastic bucket handle may receive a lot of "wear and
tear" simply because the operator uses it every time he
or she places trash into the compactor, or removes or
replaces the bag. If the handle is scratched, chipped or
broken, replace it.
BUCKET
HANDLE
SCREW
1. Remove two Phillips head screws and detach the
handle from the bucket.
2. Installation is the reverse of removal.