Section A - Installation; Free-Standing; Built-In Installation; Mounting Straps - Broan Elite 15XEWH Service Manual

Your compactor has been designed to require minimum
space without loss of capacity whether free-standing or
built-in.

Free-Standing

As shipped, the compactor is only confi gured for built-in
installations. This appliance can be converted from built-
in to free-standing with the use of Toe Kick Accessory Kit
Model 15TCTK (sold separately).
If additional cord length is required for free-standing
installation, remove the cord clamp and wire tie on the
back of the unit.
CAUTION
Failure to use Toe Kick Assembly Kit Model 15TCTK in
a free-standing installation may cause the compactor
to be unstable during operation.
Section A – Installation

Built-in Installation

MOUNTING STRAPS

TOP OF
COMPACTOR
FRONT OF
COMPACTOR
Two under-counter mounting straps are provided. Use
these straps to secure the compactor to the underside
of a countertop.
Fasten the slotted end of the straps to the compactor
using the holes in the top of the compactor cabinet as
shown.
NOTE: When installation compactor under granite or
solid surface countertops, bend the mounting straps so
they can be secured to the adjacent cabinetry.

UNDER-COUNTER OPENING

34 1 /
2
ELECTRICAL
Opening
OUTLET
15" Wide
34-1/2" High
22" Deep
The compactor requires an under-counter opening 15-in.
wide, 34-1/2-in. high, and 22-in. deep.
Plan to provide an electrical outlet in the opening that
meets all applicable electrical codes and requirements.
See "Grounding Instructions" on Page 2 for specifi c
information.
15" W
22" D
" H
12" MIN
5