Cord Clamp; Leveling The Compactor - Broan Elite 15XEWH Service Manual

6
Section A – Installation

CORD CLAMP

The compactor is equipped with a 6-ft. long power cord.
Use the cord clamp to prevent excess power cord from
being pinched beneath the cabinet during installation or
service.
CORD
CLAMP

Leveling the Compactor

Your compactor has four adjustable levelers; (2) rollers in
the rear and (2) legs in the front. They allow you to adjust
for uneven fl oors and also trim the unit up to fi t an under-
counter installation.
BACK OF
COMPACTOR
ADJUSTING
SCREWS
ROLLERS
To level the back of the compactor:
Tip the back of compactor up and onto a wood block.
Loosen the adjusting screws only far enough to move the
rollers to a higher or lower slot. Retighten the adjusting
screws and remove the wood block.
WOOD
BLOCK
To level the front of the compactor:
Tip the front of compactor up and onto a wood block.
Turn the leveling legs in or out to the desired position.
Remove the wood block.
SLOTS
WOOD
BLOCK
FRONT OF
COMPACTOR
LEVELING
LEGS