Start Switch; Remove And Replace; Access To Components; Remove Cabinet Cover - Broan Elite 15XEWH Service Manual

24
Section D – Electrical Components

Start Switch

REMOVE AND REPLACE

The start switch is located inside of the cabinet, behind
the push button assembly.
1. Remove control panel assembly (see Control Panel
Assembly, Remove and Re-install).
2. Remove start switch (2 screws).
SCREWS
3. Installation is the reverse of removal.

Access to Components

In order to access the electrical components, it is fi rst
necessary to remove the cabinet cover.

REMOVE CABINET COVER

1. Remove the bucket from the compactor (see
Trash Bucket).
2. Remove the door assembly, the (2) bottom door
gasket retainers (see Cabinet, Door Assembly).
3. Remove the back panel by fi rst removing the Phillips
head screw that secures the power cord cable clamp
to the back panel, and then removing the 16 screws
that secure the panel to the cabinet.
SCREWS
BAG
STORAGE
CONTROL
SCREWS
PANEL
Cabinet,
SCREWS
BACK
PANEL
SCREW
CABLE
CLAMP