Control Panel Assembly
REMOVE AND RE-INSTALL
The control panel assembly houses the display panel, the
safety interlock switch, the battery backup compartment,
the bag storage, and the odor control disk tray.
SCREWS
CONTROL
PANEL
SCREWS
1.
On the front of the unit, remove the fi ve Phillips head
screws that secure the control panel assembly to the
cabinet cover.
Section D – Electrical Components
2.
After removing these fi ve screws, open odor disk tray,
pull the panel away from the cabinet and disconnect
the fi ve wiring harnesses.
3.
Installation is the reverse of removal.
WIRING
HARNESSES
WIRING
HARNESS
27