Table of Contents
Advertisement
EN
9.7
Menu
To access the dome's main Setup Menu enter 95-[PRESET].
AutoDome will display a list of configuration items. Some
menu items can be locked and require a system password to
access. The Bosch Menu item provides full access to the
AutoDome menus.
9.8
Preset Titles
Preset titles can be added, removed, or changed through the
main Setup Menu through the Edit Presets menu item.
Some Pelco preset titles can be 20 characters long;
however AutoDome only supports 16 characters and
will drop the last 4.
9.9
Patterns
Pelco Patterns or recordings are supported. The AutoDome
supports patterns 1 and 2.
1.
To start recording a Pattern, enter #[PATTERN] where
the number specifies which of the 2 supported patterns
to record.
2.
The command to stop a pattern varies among different
Pelco controllers. Consult the specific Pelco controller's
documentation for information on setting Patterns.
3.
To playback a recorded Pattern, select the desired pattern
number and momentarily press (do not hold) the
[PATTERN] key. The user can stop the playback by
sending any PTZ, focus, or iris command.
9.10
Preset Tour
The AutoDome can be programmed to execute a Preset Tour
with adjustable dwell times. To start a tour, the Pattern 3
command must be sent from the Pelco controller by entering
3-[PATTERN]. Consult the specific Pelco controller's
documentation for information on setting Patterns.
Dwell time can be adjusted by entering 95-[PRESET] to enter
the main Setup Menu and then selecting the Tour Period menu
item. Presets to include on a tour can also be added or deleted
through the Edit Tour menu item.
9.11
95-PRESET Menu
When a 95-[PRESET] command is sent from a Pelco control
device, the AutoDome displays the main Setup Menu.
Following are the menu items and a brief description:
© 2005 Bosch Security Systems
Bosch Menu...
(Locked) Accesses the full AutoDome con-
figuration menu and all AutoDome settings.
Command Lock:
(Locked) Allows/Disallows (ON/OFF)
locked commands to be accessed.
Edit Password:
(Locked) Sets or displays password. See
Auto Dome Security, SECTION 4 for
details. (Must enter password to unlock
menu even if set to 0000 or 9999.)
FastAddress...
(Locked) Sets/changes the dome address
using the keyboard and on-screen menus.
Limit Stops:
(Unlocked) Enabled determines if an Auto
Scan (99-PRESET) scans between left and
right limits. Disabled will scan continuous
360
.
°
Edit Tour...
(Unlocked) Presets can be
removed/restored (On/Off) from the Preset
tour, via an on-screen menu. Presets can
still be displayed manually.
Edit Presets...
(Unlocked) Permits modification of Preset
scenes from an on-screen menu (recom-
mended).
White Balance:
(Locked) Default setting when controller's
white balance is off.
Scan Speed:
(Unlocked) On-screen menu allows the
setting of the AutoPan and AutoScan
speeds. Default is 30 degrees/second.
Stabilization:
(Unlocked) Enables/disables stabilization
mode. Only available with some cameras.
Tour Period:
(Unlocked) On-screen menu changes the
length of waiting time between presets.
Recordings:
(Unlocked) Used to select record Pattern 1
or 2, if normal pattern command does not
respond.
Night Mode:
(Unlocked) Switches from color to
monochrome (Day/Night models only).
AutoPivot:
(Locked) Allows a subject to be followed
while beneath the camera, without inverting
the picture. Default is ON.
Software Version...(Unlocked) Briefly displays the camera
software versions.
Restore Factory Defaults...
(Locked) Restores factory defaults.
Section 9
Page 21 of 40
Hide quick links:
Advertisement
Table of Contents
